昨晚去看望受伤的朋友, 他的头部受伤, 下巴骨折, 现在不能张嘴. 所以我买了一些东西, 黑芝麻糊, 荔枝, 
给他好好补补, 留了这么多血, 该好好修养. 医生叫他休息大概100天左右. 

事情大概是这样的:

他上星期四晚 11 点多于 Clark & Fifth (near Far East) 被人打晕，
抢走身上所有东西。 几十分钟后才醒过来报警。

他家就住我家西边两个block, 想不到这里也这么不安全, 以后晚上十一二点回去的时候该叫safe ride 服务了.

各位在美国的兄弟姐妹要多多注意安全啊!

Run-034 (7/12/2005, 12:13 PM)
Goal:
§ To test the "Eutectic halt" technique of determining phase transition
§ To test the Labview DAQ and Control program written by me
Starting material:
§ Fe9%wt.S, put relatively more sample to increase the Eutectic halt effect
Experiment settings:
§ Use a relatively low ramp rate 1800 ºC/hour
§ Collect data of pressure, temperature, operation power and power curve
§ Temperature settings:
□ Pr1 = 1800 ºC/hour
□ Pl1 = 1000 ºC
□ Pt1 = step
□ Pr2 = 1800 ºC/hour
□ Pl2 = 1000 ºC
□ Pt2 = 60 minutes (I modified the dwell time in minutes in 7/11/2005)
Procedure:
§ To increase the sensitivity of operation power according to
temperature, I manually increase the temperature to a certain level
(1000 ºC), and then turn to ramp mode (be aware of the change of
operation power).
§ Try to use labview program to control the temperature settings in Eurotherm

Just a record!

Post through Email!